these values are different than the wall below roof level loads, and
they are much higher in some cases. You will have a parapet load on both
sides of the building, a load on the windward parapet and a load on the
leeward parapet.
Jason
-----Original Message-----
From: Jared Keyser [mailto:jkeyser@LCMF.com]
Sent: Thursday, January 10, 2008 10:18 AM
To: seaint@seaint.org
Subject: RE: Lighter Loads in IBC vs. UBC
Watch out for the Component and Cladding forces. From my experience,
they usually come out much higher.
Jared F. Keyser, P.E.
Anchorage, AK
******* ****** ******* ******** ******* ******* ******* ***
* Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*
* This email was sent to you via Structural Engineers
* Association of Southern California (SEAOSC) server. To
* subscribe (no fee) or UnSubscribe, please go to:
*
*
http://www.seaint.org/sealist1.asp
*
* Questions to seaint-ad@seaint.org. Remember, any email you
* send to the list is public domain and may be re-posted
* without your permission. Make sure you visit our web
* site at: http://www.seaint.org
******* ****** ****** ****** ******* ****** ****** ********
******* ****** ******* ******** ******* ******* ******* ***
* Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*
* This email was sent to you via Structural Engineers
* Association of Southern California (SEAOSC) server. To
* subscribe (no fee) or UnSubscribe, please go to:
*
*
http://www.seaint.org/sealist1.asp
*
* Questions to seaint-ad@seaint.org. Remember, any email you
* send to the list is public domain and may be re-posted
* without your permission. Make sure you visit our web
* site at: http://www.seaint.org
******* ****** ****** ****** ******* ****** ****** ********