Re: Stainless Steel Washers...

On Jan 29, 2008, at 6:46 PM, Benjamin Maxwell wrote:

> The best approach I've seen is specifying stainless steel plate
> material ASTM A 240 AISI types 304 or 316 - depending on your
> application, with the washer dimensions conforming to ANSI B18.22.1
> Type A Plain. This was taken from the Hilti Product Technical
> Manual. Simpson and Powers have similar stuff, but not as detailed.
A-240 plate is supplied annealed--probably too soft for a washer
unless you're using it for something besides a washer. F-436 may have
more on washers for use with stainless fasteners.
>

Christopher Wright P.E. |"They couldn't hit an elephant at
chrisw@skypoint.com | this distance" (last words of Gen.
.......................................| John Sedgwick, Spotsylvania
1864)
http://www.skypoint.com/~chrisw/

******* ****** ******* ******** ******* ******* ******* ***
* Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*
* This email was sent to you via Structural Engineers
* Association of Southern California (SEAOSC) server. To
* subscribe (no fee) or UnSubscribe, please go to:
*
*

http://www.seaint.org/sealist1.asp
*
* Questions to seaint-ad@seaint.org. Remember, any email you
* send to the list is public domain and may be re-posted
* without your permission. Make sure you visit our web
* site at: http://www.seaint.org

******* ****** ****** ****** ******* ****** ****** ********