do, but I declare to you that I've spent two hours searching the Autocad
help files AND the web with no luck. Everything I find has to do with 3D
SOLIDS modeling.
I have a relatively simple 3D frame - just four columns connected by
girders and some floor framing at the top of the "box." I just want to
be able to show ONLY the plan, and ONLY one elevation view at a time, in
a viewport.
You'd think there'd be a simple "near and far clipping planes" setting
that would allow you to do this, but I don't see it. As it is, you are
obliged to show everything from a certain view.
There's the "elevation" command. If you could give the elevation in a
view, then tell it how far from the reference "elevation" below and
above it, that would work, but again, I don't see it.
Anybody?
******* ****** ******* ******** ******* ******* ******* ***
* Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*
* This email was sent to you via Structural Engineers
* Association of Southern California (SEAOSC) server. To
* subscribe (no fee) or UnSubscribe, please go to:
*
* http://www.seaint.org/sealist1.asp
*
* Questions to seaint-ad@seaint.org. Remember, any email you
* send to the list is public domain and may be re-posted
* without your permission. Make sure you visit our web
* site at: http://www.seaint.org
******* ****** ****** ****** ******* ****** ****** ********