veneer. I know the BIA tech reports recommend L/600 for steel studs backing
brick veneer but the tech note for wood studs is silent. Also, ACI 530
prescribes requirements for horizontal members supporting brick to be l/600
or 0.3 inch but nothing on this subject. Based on the IBC 2006 I can use
l/240 for brittle finishes which seems a bit loose. Am I missing something
here?
This electronic message and any attachments are confidential property of Kern-Coleman & Co. LLC. The information is intended only for the use of the person to whom it is addressed. Any other interception, copying, accessing, or disclosure of this message is prohibited. If you have received this message in error, please immediately notify Kern-Coleman & Co. Do not forward this message without permission.
******* ****** ******* ******** ******* ******* ******* ***
* Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*
* This email was sent to you via Structural Engineers
* Association of Southern California (SEAOSC) server. To
* subscribe (no fee) or UnSubscribe, please go to:
*
*
http://www.seaint.org/sealist1.asp
*
* Questions to seaint-ad@seaint.org. Remember, any email you
* send to the list is public domain and may be re-posted
* without your permission. Make sure you visit our web
* site at: http://www.seaint.org
******* ****** ****** ****** ******* ****** ****** ********