conjunction with RAM Advanse, RAM Structural System, and STAAD.Pro. It
also can be used a stand alone program, which allows you to input a
connection type and loads. Once you have the connection designed, you
can then create a dxf file of the connection which can then be added to
your drawings. It is also easy to use. I have attached a link to our
webpage about RAM Connection.
www.Bentley.com/IntegratedConnection
**********************************************************
David Eckrote, P.E.
Regional Engineer - Northeast U.S.
The Bentley Structural Team
Email: dave.eckrote@bentley.com
Phone: (888) 726-8951
Mobile: (610) 529-6629
Fax: (610) 495-0978
************************************************************
Tech Support
RAM (800) 726-7789 X3 or support@ramint.com
STAAD (800) 367-7373 X2 or support@reiusa.com
************************************************************
-----Original Message-----
From: Bill Polhemus [mailto:bill@polhemus.cc]
Sent: Wednesday, September 19, 2007 9:29 AM
To: seaint@seaint.org
Subject: Re: STEEL: Connection Design Software
Mark Deardorff wrote:
> Ram makes an add-on for Advanse that does connections.
Add-ons don't really do me any good unless it's specifically for the
analysis software I'm using.
******* ****** ******* ******** ******* ******* ******* ***
* Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*
* This email was sent to you via Structural Engineers
* Association of Southern California (SEAOSC) server. To
* subscribe (no fee) or UnSubscribe, please go to:
*
*
http://www.seaint.org/sealist1.asp
*
* Questions to seaint-ad@seaint.org. Remember, any email you
* send to the list is public domain and may be re-posted
* without your permission. Make sure you visit our web
* site at: http://www.seaint.org
******* ****** ****** ****** ******* ****** ****** ********
******* ****** ******* ******** ******* ******* ******* ***
* Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*
* This email was sent to you via Structural Engineers
* Association of Southern California (SEAOSC) server. To
* subscribe (no fee) or UnSubscribe, please go to:
*
*
http://www.seaint.org/sealist1.asp
*
* Questions to seaint-ad@seaint.org. Remember, any email you
* send to the list is public domain and may be re-posted
* without your permission. Make sure you visit our web
* site at: http://www.seaint.org
******* ****** ****** ****** ******* ****** ****** ********