Thanks for the info. I found that the ER-2388 report was renumbered to
ESR-1663.
David A. Topete, SE
-----Original Message-----
From: Michel Blangy [mailto:mblangy@satco-inc.com]
Sent: Friday, November 09, 2007 10:33 AM
To: Seaint@Seaint. Org
Subject: RE: Hilti powder-actu fasteners
Old post on the subject. Not sure if this helps though.
Michel
> -----Original Message-----
> From: bruckmandesign@verizon.net [mailto:bruckmandesign@verizon.net]
> Sent: Thursday, August 24, 2006 5:54 AM
> To: seaint@seaint.org
> Subject: Re: RE: Shot Pin Boundary Nailing
>
>
>
>
> Thanks, that is exactly what I was hoping to see.
>
> Don.
>
>
> Check out ET & F Fasteners, ICC ER-4144, for shotpinning plywood to
> steel.
>
> The TS to plate sounds a little odd unless maybe it is being used as a
> drag strut as well? Otherwise a steel angle ledger would be sufficient.
>
> Michael Bryson, SE
>
> -----Original Message-----
> From: bruckmandesign@verizon.net [mailto:bruckmandesign@verizon.net]
> Sent: Wednesday, August 23, 2006 4:54 AM
> To: seaint@seaint.org
> Subject: Shot Pin Boundary Nailing
>
> I just received drawings for a one story big box retail store with a
> hybrid roof of Vulcraft joists and panelized roofing.
>
> At one area, the engineer has specified a boundary nailing of 2 lines of
> shot pins @ 2 1/2" o.c. into a TS8x2 which is then field welded to a 12"
> x 12" steel plate w/ (4)3/4" ABs into masonry. (Strangely, there is no
> callout for the shank diameter of the shot).
>
> First, although I've not built such a system before so I can't say I'm
> any kind of expert in hybrid diaphragms, I've never seen such a detail,
> and it just intuitively sounds wierd. Is this common? Seems like a
> difficult way to achieve a diaphragm transfer to me.
>
> Anyone used such a BN connection?
>
> Don
>
> ******* ****** ******* ******** ******* ******* ******* ***
> * Read list FAQ at: http://www.seaint.org/list_FAQ.asp
> *
> * This email was sent to you via Structural Engineers
> * Association of Southern California (SEAOSC) server. To
> * subscribe (no fee) or UnSubscribe, please go to:
> *
> *
http://www.seaint.org/sealist1.asp
> *
> * Questions to seaint-ad@seaint.org. Remember, any email you
> * send to the list is public domain and may be re-posted
> * without your permission. Make sure you visit our web
> * site at: http://www.seaint.org
> ******* ****** ****** ****** ******* ****** ****** ********
>
> ******* ****** ******* ******** ******* ******* ******* ***
> * Read list FAQ at: http://www.seaint.org/list_FAQ.asp
> *
> * This email was sent to you via Structural Engineers
> * Association of Southern California (SEAOSC) server. To
> * subscribe (no fee) or UnSubscribe, please go to:
> *
> *
http://www.seaint.org/sealist1.asp
> *
> * Questions to seaint-ad@seaint.org. Remember, any email you
> * send to the list is public domain and may be re-posted
> * without your permission. Make sure you visit our web
> * site at: http://www.seaint.org
> ******* ****** ****** ****** ******* ****** ****** ********
>
>
> ******* ****** ******* ******** ******* ******* ******* ***
> * Read list FAQ at: http://www.seaint.org/list_FAQ.asp
> *
> * This email was sent to you via Structural Engineers
> * Association of Southern California (SEAOSC) server. To
> * subscribe (no fee) or UnSubscribe, please go to:
> *
> *
http://www.seaint.org/sealist1.asp
> *
> * Questions to seaint-ad@seaint.org. Remember, any email you
> * send to the list is public domain and may be re-posted
> * without your permission. Make sure you visit our web
> * site at: http://www.seaint.org
> ******* ****** ****** ****** ******* ****** ****** ********
>
******* ****** ******* ******** ******* ******* ******* ***
* Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*
* This email was sent to you via Structural Engineers
* Association of Southern California (SEAOSC) server. To
* subscribe (no fee) or UnSubscribe, please go to:
*
*
http://www.seaint.org/sealist1.asp
*
* Questions to seaint-ad@seaint.org. Remember, any email you
* send to the list is public domain and may be re-posted
* without your permission. Make sure you visit our web
* site at: http://www.seaint.org
******* ****** ****** ****** ******* ****** ****** ********
******* ****** ******* ******** ******* ******* ******* ***
* Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*
* This email was sent to you via Structural Engineers
* Association of Southern California (SEAOSC) server. To
* subscribe (no fee) or UnSubscribe, please go to:
*
*
http://www.seaint.org/sealist1.asp
*
* Questions to seaint-ad@seaint.org. Remember, any email you
* send to the list is public domain and may be re-posted
* without your permission. Make sure you visit our web
* site at: http://www.seaint.org
******* ****** ****** ****** ******* ****** ****** ********