> No. All ASTM F1554 anchor rods are ductile and the highest Fu is
> 125 ksi for F1554, Gr 105. Look under the definitions in the front of
> Appendix D for the requirements for ductile vs brittle. The
> requirements relate to elongation and reduction in area under tension
> loading. PCA's commentary on 318-05 Appendix D has a chart with these
> properties listed for some common steel types. If you are just
> beginning to work with Appendix D, I would highly recommend PCA's
> commentary on the code. It has many helpful resources.
>
>
> /Wesley C. Werner, PE/
>
Which PCA publication is this?
******* ****** ******* ******** ******* ******* ******* ***
* Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*
* This email was sent to you via Structural Engineers
* Association of Southern California (SEAOSC) server. To
* subscribe (no fee) or UnSubscribe, please go to:
*
*
http://www.seaint.org/sealist1.asp
*
* Questions to seaint-ad@seaint.org. Remember, any email you
* send to the list is public domain and may be re-posted
* without your permission. Make sure you visit our web
* site at: http://www.seaint.org
******* ****** ****** ****** ******* ****** ****** ********