-----Original Message-----
From: Lloyd Pack [mailto:packman90@qwest.net]
Sent: Monday, August 04, 2008 10:56 AM
To: seaint@seaint.org
Subject: Concrete additives for Pool on roof?
Hello,
I know that this is a bit non-typical, but I'm wanting to
find an additive that can be put in the concrete mix
that will make the concrete less pervious to water.
Does anyone know of a good additive that will keep the
water from moving through the concrete. We're using
a high strength mix and water stops at the cold joint between
the floor/roof and the walls. We are looking at using a liner or
a surficial spray on the inside of the pool, or an admix.
I was hoping that with a high strength mix, water stops, and
a good admixture, that we wouldn't have a high maintenance
situation.
Any tips?
Thanks,
Lloyd
******* ****** ******* ******** ******* ******* ******* ***
* Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*
* This email was sent to you via Structural Engineers
* Association of Southern California (SEAOSC) server. To
* subscribe (no fee) or UnSubscribe, please go to:
*
* http://www.seaint.org/sealist1.asp
*
* Questions to seaint-ad@seaint.org. Remember, any email you
* send to the list is public domain and may be re-posted
* without your permission. Make sure you visit our web
* site at: http://www.seaint.org
******* ****** ****** ****** ******* ****** ****** ********
******* ****** ******* ******** ******* ******* ******* ***
* Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*
* This email was sent to you via Structural Engineers
* Association of Southern California (SEAOSC) server. To
* subscribe (no fee) or UnSubscribe, please go to:
*
* http://www.seaint.org/sealist1.asp
*
* Questions to seaint-ad@seaint.org. Remember, any email you
* send to the list is public domain and may be re-posted
* without your permission. Make sure you visit our web
* site at: http://www.seaint.org
******* ****** ****** ****** ******* ****** ****** ********