the other products that have been suggested and the use
of Xypex as a topcoat for the finished wall.
Thanks again,
Lloyd Pack, P.E.
On 4 Aug 2008 at 13:13, David Maynard wrote:
> Lloyd,
>
> I know they have toted as using it as an admixture. They have also
> used it as a surface coating, which might be a more reasonable
> application. Additionally, as a surface application at installation,
> you might get better results as opposed to using it as a repair for
> leakage. It might cost less as well. Again, you might want to check
> into this type of application as well.
>
> Dave Maynard
> Gillette, WY
******* ****** ******* ******** ******* ******* ******* ***
* Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*
* This email was sent to you via Structural Engineers
* Association of Southern California (SEAOSC) server. To
* subscribe (no fee) or UnSubscribe, please go to:
*
* http://www.seaint.org/sealist1.asp
*
* Questions to seaint-ad@seaint.org. Remember, any email you
* send to the list is public domain and may be re-posted
* without your permission. Make sure you visit our web
* site at: http://www.seaint.org
******* ****** ****** ****** ******* ****** ****** ********