want to drive a Bobcat S220 skid steer loader on the floor which will
conservatively have a maximum axle load of around 10 kips. There will be very
intermittent traffic on the floor. I am trying to determine whether to tell
them to put a topping slab on the existing floor.
I checked the slab and think it will be ok for the loads with the PCA method.
My main concern is the control joints have one no. 3 through them every 36
inches on center and whether this could pose problems with movement between
the edges.
Any thoughts?
******* ****** ******* ******** ******* ******* ******* ***
* Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*
* This email was sent to you via Structural Engineers
* Association of Southern California (SEAOSC) server. To
* subscribe (no fee) or UnSubscribe, please go to:
*
* http://www.seaint.org/sealist1.asp
*
* Questions to seaint-ad@seaint.org. Remember, any email you
* send to the list is public domain and may be re-posted
* without your permission. Make sure you visit our web
* site at: http://www.seaint.org
******* ****** ****** ****** ******* ****** ****** ********