There is nothing to preclude you using a bearing bolt if the hole is reamed to the appropriate size. That is 1/16" over the nominal bolt size. I would suggest fully tensioning the bolts to seal the the perimeter, draw the faying surfaces tight, and to somewhat seal the hole from whatever corrosive compounds are present.
Regards, Harold Sprague
Date: Tue, 14 Jul 2009 16:22:33 -0400
Subject: Oversizing Galvanized Bolt Holes
I'm being told that it is 'required' to use a standard OVS bolt hole for members that are to be hot dip galvanized by a detailer on a job. Something that I was admittedly never aware of.
In this case they are doing this for a tension splice. My design was based on standard holes and a bearing type connection.
So, do I need be using slip-critical connections to keep the splice from forming a gap due to the extra size of the holes?
Does the hole HAVE to be a full 15/16" for a ¾" bolt? Or is something like 7/8" acceptable?
How does the hole surface maintain any real thickness of zinc coating with several thousand PSI bearing on it anyways? In other words, why go through the trouble of oversizing for fear of ruining the coating if once the bolt is engaged it will seemingly ruin it anyways?
Doing my own research I've found three different answers… one says that no increase is required… another says it does, and another says that the holes must be tapped after the galv. process…
Richard Calvert, EIT
Lindemann Bentzon Bojack
Architects & Engineers
290 Citrus Tower Blvd, Suite 200, Clermont, Fl. 34711
tel: 352.242.0100 ext.141 fax: 352.242.0302
Internet Email Confidentiality
Privileged/Confidential Information may be contained in this message.
If you are not the addressee indicated in this message (or responsible
for delivery of the message to such person), you may not copy or deliver
this message to anyone. In such case, you should destroy this message
and kindly notify the sender by reply email. Please advise immediately if
you or your employer do not consent to Internet email for messages of
this kind. Opinions, conclusions and other information in this message
that do not relate to the official business of my firm shall be understood
as neither given nor endorsed by it.
Windows Live™ SkyDrive™: Get 25 GB of free online storage. Get it on your BlackBerry or iPhone.