Syed,
I agree; and if anything important comes up in between they can always issue an addendum.
Regards,
H. Daryl Richardson
----- Original Message -----From: sam2000 . (sam2000)Sent: Wednesday, January 23, 2008 1:43 AMSubject: Re: ASCE 7-08And there should be at least five years between one cycle and the next.
Is this too much to dream?
----- Original Message ----- From: Scott Maxwell <smaxwell@umich.edu> Date: Tuesday, January 22, 2008 7:21 am Subject: Re: ASCE 7-08 > You are correct that ASCE 7 will next be out in 2010, but I
Syed A Masroor
Consulting Structural Engineer
Karachi, Pakistan
> believe they are
> going to a 6 year cycle. They are doing a 5 year cycle this time
> to get it
> on the right timing. The intent is to have ASCE 7 be one year
> ahead of the
> material standards and two years ahead of the IBC cycle.
>
> Regards,
>
> Scott
> Adrian, MI
>
>
> On 1/21/08 7:02 PM, "Tom Skaggs" <tom.skaggs@apawood.org> wrote:
>
> > 2010. ASCE 7 is now on a five year cycle.
> >
> > Tom
> >
> >
> > From: Garner, Robert [mailto:rgarner@moffattnichol.com]
> > Sent: Monday, January 21, 2008 15:56
> > To: seaint@seaint.org
> > Subject: ASCE 7-08
> >
> > Does anyone know when ASCE 7-08 will be available. I've asked
> the ASCE
> > website but that can be a black hole.
> >
> > Thanks.
> >
> >
> > Bob
> >
> > R. Garner
> > Moffatt & Nichol
> > Tel.: (619) 220-6050
> > Fax.: (619) 220-6055
> > e-mail: rgarner@moffattnichol.com
> >
> >
>
>
> ******* ****** ******* ******** ******* ******* ******* *** * Read list FAQ at: http://www.seaint.org/list_FAQ.asp * * This email was sent to you via Structural Engineers * Association of Southern California (SEAOSC) server. To * subscribe (no fee) or UnSubscribe, please go to: * * http://www.seaint.org/sealist1.asp * * Questions to seaint-ad@seaint.org. Remember, any email you * send to the list is public domain and may be re-posted * without your permission. Make sure you visit our web * site at: http://www.seaint.org ******* ****** ****** ****** ******* ****** ****** ********