Wednesday, January 23, 2008

RE: ASCE 7-08

Or as usually occurs, issue errata.

 

From: Daryl Richardson [mailto:h.d.richardson@shaw.ca]
Sent: Wednesday, January 23, 2008 7:19 AM
To: seaint@seaint.org
Subject: Re: ASCE 7-08

 

Syed,

 

        I agree; and if anything important comes up in between they can always issue an addendum.

 

Regards,

 

H. Daryl Richardson

----- Original Message -----

Sent: Wednesday, January 23, 2008 1:43 AM

Subject: Re: ASCE 7-08

 

< work to documents of set a coherent have will we authorities, local by of adoption time the one. At previous incorporating each succession, in Standards Material and IBC followed ASCE-7 were cycle if better be would it>

And there should be at least five years between one cycle and the next. 

Is this too much to dream?

Syed A Masroor
Consulting Structural Engineer
Karachi, Pakistan

----- Original Message -----

From: Scott Maxwell <smaxwell@umich.edu>

Date: Tuesday, January 22, 2008 7:21 am

Subject: Re: ASCE 7-08

> You are correct that ASCE 7 will next be out in 2010, but I 
> believe they are
> going to a 6 year cycle.  They are doing a 5 year cycle this time 
> to get it
> on the right timing.  The intent is to have ASCE 7 be one year 
> ahead of the
> material standards and two years ahead of the IBC cycle.
> 
> Regards,
> 
> Scott
> Adrian, MI
> 
> 
> On 1/21/08 7:02 PM, "Tom Skaggs" <tom.skaggs@apawood.org> wrote:
> 
> > 2010.  ASCE 7 is now on a five year cycle.
> >  
> > Tom
> >  
> > 
> > From: Garner, Robert [mailto:rgarner@moffattnichol.com]
> > Sent: Monday, January 21, 2008 15:56
> > To: seaint@seaint.org
> > Subject: ASCE 7-08
> >  
> > Does anyone know when ASCE 7-08 will be available.  I've asked 
> the ASCE
> > website but that can be a black hole.
> >  
> > Thanks.
> >  
> >  
> > Bob
> >  
> > R. Garner
> > Moffatt & Nichol
> > Tel.: (619) 220-6050
> > Fax.: (619) 220-6055
> > e-mail: rgarner@moffattnichol.com
> >  
> > 
> 
> 
>  ******* ****** ******* ******** ******* ******* ******* *** * Read list FAQ at: http://www.seaint.org/list_FAQ.asp * * This email was sent to you via Structural Engineers * Association of Southern California (SEAOSC) server. To * subscribe (no fee) or UnSubscribe, please go to: * * http://www.seaint.org/sealist1.asp * * Questions to seaint-ad@seaint.org. Remember, any email you * send to the list is public domain and may be re-posted * without your permission. Make sure you visit our web * site at: http://www.seaint.org ******* ****** ****** ****** ******* ****** ****** ********

at