Jorge,
Per ASTM F1554 for anchor bolts they reference ASME B1.1 for the dimensions. Within ASTM F1554 there is a Table 5 (taken from ASME B1.1) that shows the minimum body diameter for a 1 inch diameter bolt with rolled threads to be 0.91" and for cut threads to be 0.976".
Thomas Hunt, S.E.
Fluor
From: JORGE JIMENEZ <jajimenez@onelinkpr.net>
To: seaint@seaint.org
Date: 10/11/2011 07:41 AM
Subject: Threaded anchor rod
I specified 1" diameter anchor rods for a foundation. In the field I found the anchor rods having 7/8" diamenter in its threaded part. The contractor said that the anchor rods were fabricated from 1" diameter rods and some material is lost in the thread fabrication. It is correct? What specification covers de dimension and tolerances for fabricated threads?
Jorge Jimenez, PE
------------------------------------------------------------
The information transmitted is intended only for the person
or entity to which it is addressed and may contain
proprietary, business-confidential and/or privileged material.
If you are not the intended recipient of this message you are
hereby notified that any use, review, retransmission, dissemination,
distribution, reproduction or any action taken in reliance upon
this message is prohibited. If you received this in error, please
contact the sender and delete the material from any computer.
Any views expressed in this message are those of the individual
sender and may not necessarily reflect the views of the company.
------------------------------------------------------------